Mate’s license (Licensed Cores ) is not compatible with my license (Licensed Cores )

I’ve configured many clusters using Cisco ASA gear, but this time i got a strange message bringing the cluster UP (active/passive) using a pair of 5510 (code asa842-k8.bin).

Error message:

Mate’s license (Licensed Cores ) is not compatible with my license (Licensed Cores ). Failover will be disabled.
Understanding Licensing models it´s always hard, because of the product evolution. But i was wondering even with same License (Security Plus) could be because of having different AnyConnect seats? After generate a demo license didn’t work, so my last guess was look to release notes and Bingo! Affected by CSCtj87870

After upgrade to 8.4(7) it worked!

Firewall 1

FW1# show activation-key
Serial Number: JMXyyyyyyyy
Running Permanent Activation Key: 0x0f19ee7b 0x2cf2fb8c 0x4ce23d7c 0xb0d4587c 0x013d09beLicensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual

This platform has an ASA 5510 Security Plus license.

The flash permanent activation key is the SAME as the running permanent key.

Firewall 2

FW2# show activation-key
Serial Number: JMXxxxxxxx
Running Permanent Activation Key: 0xfe13ca68 0xd8bc8063 0x697114e4 0xccd4b0c0 0x4004cbb6Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 50 perpetual
AnyConnect Essentials : 250 perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual

This platform has an ASA 5510 Security Plus license.

The flash permanent activation key is the SAME as the running permanent key.

FW1/act# show failover
Failover On
Failover unit Primary
Failover LAN Interface: FAILOVER Ethernet0/3 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 0 of 110 maximum
failover replication http
Version: Ours 8.4(7), Mate 8.4(7)
Last Failover at: 19:24:17 GMT/BDT Jul 13 2015
This host: Primary – Active
Active time: 72212 (sec)
slot 0: ASA5510 hw/sw rev (2.0/8.4(7)) status (Up Sys)
Interface outside (185.11.166.209): Normal (Not-Monitored)
Interface inside (10.1.1.254): Normal (Not-Monitored)
slot 1: empty
Other host: Secondary – Standby Ready
Active time: 0 (sec)
slot 0: ASA5510 hw/sw rev (2.0/8.4(7)) status (Up Sys)
Interface outside (0.0.0.0): Normal (Not-Monitored)
Interface inside (0.0.0.0): Normal (Not-Monitored)
slot 1: emptyStateful Failover Logical Update Statistics
Link : FAILOVER Ethernet0/3 (up)
Stateful Obj    xmit       xerr       rcv        rerr
General         10714600   0          9605       1
sys cmd         9605       0          9605       1
up time         0          0          0          0
RPC services    0          0          0          0
TCP conn        265004     0          0          0
UDP conn        9540443    0          0          0
ARP tbl         488430     0          0          0
Xlate_Timeout   0          0          0          0
IPv6 ND tbl     0          0          0          0
VPN IKEv1 SA    3          0          0          0
VPN IKEv1 P2    146        0          0          0
VPN IKEv2 SA    0          0          0          0
VPN IKEv2 P2    0          0          0          0
VPN CTCP upd    0          0          0          0
VPN SDI upd     0          0          0          0
VPN DHCP upd    0          0          0          0
SIP Session     410969     0          0          0
Route Session   0          0          0          0
User-Identity   0          0          0          0

Logical Update Queue Information
Cur     Max     Total
Recv Q:         0       8       9606
Xmit Q:         0       122     10979540

Leave a Comment

Translate »
Google no longer supports Google Images API and this plugin can't work.

You can try to use other plugins with the same feature:
WP Picasa Box - http://codecanyon.net/item/wp-picasa-box/16099962
WP Pixabay Search And Insert - http://wpclever.net/downloads/wordpress-pixabay-search-and-insert